Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
S Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- Krok 1: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- Krok 2: Spustiť Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- Krok 3: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Predtým, ako začnete
- Windows 7/8/10/11 PC
- Stabilné internetové pripojenie počas resetovania
- Platný kľúč na resetovanie Wic Connect
- Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
Riešenie problémov
- Skúste iný kábel USB (niektoré káble sú určené len na nabíjanie).
- Zatvorte Epson Status Monitor alebo iné nástroje tlačiarne.
- Používajte priame pripojenie USB (vyhnite sa rozbočovačom).
- Dočasne vypnite VPN/proxy server, ak overenie zlyhá.
- Reštartujte tlačiareň a počítač a potom to skúste znova.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.