Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
Avec Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- Étape 1 : Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- Étape 2 : Exécuter Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- Étape 3 : Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Avant de commencer
- Windows 7/8/10/11 PC
- Connexion Internet stable pendant la réinitialisation
- Réinitialisation Wic valide Connecter la clé de réinitialisation
- Connexion USB requise (la réinitialisation Wi-Fi n'est pas prise en charge)
Dépannage
- Essayez un autre câble USB (certains câbles se chargent uniquement).
- Fermez Epson Status Monitor ou d'autres utilitaires d'imprimante.
- Utilisez une connexion USB directe (évitez les concentrateurs).
- Désactiver temporairement le VPN/proxy si la validation échoue.
- Redémarrez l'imprimante et le PC, puis réessayez.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.