Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
Met Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- Stap 1: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- Stap 2: Ren Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- Stap 3: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Voordat u begint
- Windows 7/8/10/11 PC
- Stabiele internetverbinding tijdens het resetten
- Geldige Wic Reset Verbind Resetsleutel
- USB-verbinding vereist (Wi-Fi-reset niet ondersteund)
Problemen oplossen
- Probeer een andere USB-kabel (sommige kabels zijn alleen oplaadbaar).
- Sluit Epson Status Monitor of andere hulpprogramma's voor printers.
- Gebruik een directe USB-verbinding (vermijd hubs).
- VPN/proxy tijdelijk uitschakelen als validatie mislukt.
- Start de printer en pc opnieuw op en probeer het opnieuw.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.