Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
Dengan Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- Langkah 1: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Sebelum Anda Mulai
- Windows 7/8/10/11 PC
- Koneksi Internet stabil selama pengaturan ulang
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
Pemecahan masalah
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Gunakan koneksi USB langsung (hindari hub).
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.