Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
S spletno stranjo Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- 1. korak: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- 3. korak: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Preden začnete
- Windows 7/8/10/11 PC
- Stabilna internetna povezava med ponastavitvijo
- Veljavna ponastavitev Wic Povežite tipko za ponastavitev
- Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
Odpravljanje težav
- Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
- Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
- Uporabite neposredno povezavo USB (izogibajte se vozliščem).
- Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
- Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.