Epson R320 Waste Ink Counter Reset

When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson R320 Stops Printing (Waste Counter Limit)

S Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson R320 Ink Pad Counter Reset – Quick Steps

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson R320 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.

Most Epson R320 waste counter resets finish in ~1–2 minutes.

Prije nego što počnete

• Windows 7/8/10/11 PC
• Stabilna internetska veza tijekom resetiranja
• Valjani Wic resetni ključ za povezivanje
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)

Otklanjanje poteškoća

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.