Epson R320 Waste Ink Counter Reset
When the Epson R320 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R320 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson R320 Stops Printing (Waste Counter Limit)
Với Wic Reset Connect, you can reset the Epson R320 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson R320 Ink Pad Counter Reset – Quick Steps
- Bước 1: Prepare a Windows PC + USB cable and connect Epson R320 directly. Keep Internet enabled for validation.
- Bước 2: Chạy Wic Reset Connect as Administrator and confirm Epson R320 is detected.
- Bước 3: Use the key to reset the counter, wait for completion, then restart Epson R320 to finalize.
Most Epson R320 waste counter resets finish in ~1–2 minutes.
Trước khi bắt đầu
- Máy tính Windows 7/8/10/11
- Kết nối Internet ổn định trong quá trình reset
- Khóa đặt lại kết nối Wic hợp lệ
- Cần kết nối USB (không hỗ trợ đặt lại Wi-Fi)
Khắc phục sự cố
- Hãy thử sử dụng một cáp USB khác (một số cáp chỉ hỗ trợ sạc).
- Đóng Epson Status Monitor hoặc các công cụ quản lý máy in khác.
- Sử dụng kết nối USB trực tiếp (tránh sử dụng hub).
- Tạm thời vô hiệu hóa VPN/proxy nếu quá trình xác thực thất bại.
- Khởi động lại máy in và máy tính, sau đó thử lại.
Guide prepared for Epson R320 – Waste Ink Counter Reset using Wic Reset Connect.