Epson R310 Waste Ink Counter Reset

The Epson R310 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R310 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson R310 Ink Pad Counter Warning?

Most Epson R310 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Uobičajeni simptomi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Three Steps to Restore Epson R310 Printing

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson R310 directly. Keep Internet enabled for validation.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson R310 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson R310.

Most Epson R310 waste counter resets finish in ~1–2 minutes.

Što vam je potrebno

• Stabilna internetska veza tijekom resetiranja
• Valjani Wic resetni ključ za povezivanje
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Windows 7/8/10/11 PC

Ako se pisač ne detektira

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Pokrenite aplikaciju kao administrator.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.

Često postavljana pitanja