Epson DX4000 Waste Ink Counter Reset

When the Epson DX4000 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson DX4000 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson DX4000 Waste Ink Counter

Most Epson DX4000 waste ink counter locks are solved by a software counter reset. Wic Reset Connect poskytuje jednoduchý postup.

Reset Epson DX4000 Waste Ink Counter in 3 Steps

1. Krok 1: Prepare a Windows PC + USB cable and connect Epson DX4000 directly. Keep Internet enabled for validation.
2. Krok 2: Štart Wic Reset Connect in Administrator mode and wait until Epson DX4000 appears in the device list.
3. Krok 3: Zadajte svoj resetovací kľúč a stlačte Obnovenie. Wait ~1–2 minutes, then restart Epson DX4000.

Most Epson DX4000 waste counter resets finish in ~1–2 minutes.

Čo potrebujete

• Windows 7/8/10/11 PC
• Stabilné internetové pripojenie počas resetovania
• Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
• Platný kľúč na resetovanie Wic Connect

Ak tlačiareň nie je rozpoznaná

• Skúste iný kábel USB (niektoré káble sú určené len na nabíjanie).
• Zatvorte Epson Status Monitor alebo iné nástroje tlačiarne.
• Spustite aplikáciu ako správca.
• Reštartujte tlačiareň a počítač a potom to skúste znova.
• Používajte priame pripojenie USB (vyhnite sa rozbočovačom).

Často kladené otázky