Epson DX4000 Waste Ink Counter Reset

When the Epson DX4000 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson DX4000 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson DX4000 Waste Ink Counter

Most Epson DX4000 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ofrece un procedimiento sencillo.

Reset Epson DX4000 Waste Ink Counter in 3 Steps

1. Paso 1: Prepare a Windows PC + USB cable and connect Epson DX4000 directly. Keep Internet enabled for validation.
2. Paso 2: Inicio Wic Reset Connect in Administrator mode and wait until Epson DX4000 appears in the device list.
3. Paso 3: Introduzca su clave de reinicio y pulse Restablecer. Wait ~1–2 minutes, then restart Epson DX4000.

Most Epson DX4000 waste counter resets finish in ~1–2 minutes.

Lo que necesita

• Windows 7/8/10/11 PC
• Conexión a Internet estable durante el reinicio
• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Válido Wic Reset Conectar tecla de reinicio

Si no se detecta la impresora

• Prueba con otro cable USB (algunos cables son de carga).
• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Ejecute la aplicación como Administrador.
• Reinicie la impresora y el PC y vuelva a intentarlo.
• Utiliza una conexión USB directa (evita los concentradores).

Preguntas frecuentes