Epson ET-2870 Waste Ink Counter Reset
When the Epson ET-2870 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2870 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson ET-2870 Waste Ink Counter
Z Wic Reset Connect, you can reset the Epson ET-2870 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Typowe znaki
- Drukarka odmawia drukowania nawet przy dostępnym tuszu
- Epson Status Monitor wyświetla ostrzeżenie o konserwacji
- Migające kontrolki i zablokowane zadania
- Urządzenie jest zablokowane do czasu zresetowania
Reset Epson ET-2870 Waste Ink Counter in 3 Steps
- Krok 1: Connect Epson ET-2870 to a Windows computer with a stable Internet connection using a USB cable.
- Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2870 appears in the device list.
- Krok 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2870 to finalize.
Most Epson ET-2870 waste counter resets finish in ~1–2 minutes.
Jeśli drukarka nie zostanie wykryta
- Używaj bezpośredniego połączenia USB (unikaj koncentratorów).
- Zrestartuj drukarkę i komputer, a następnie spróbuj ponownie.
- Uruchom aplikację jako administrator.
- Wypróbuj inny kabel USB (niektóre kable są przeznaczone tylko do ładowania).
- Zamknij program Epson Status Monitor lub inne narzędzia drukarki.
Guide prepared for Epson ET-2870 – Waste Ink Counter Reset using Wic Reset Connect.