Epson ET-2870 Waste Ink Counter Reset
When the Epson ET-2870 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2870 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson ET-2870 Waste Ink Counter
A címen Wic Reset Connect, you can reset the Epson ET-2870 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Tipikus jelek
- A nyomtató nem hajlandó nyomtatni, még akkor sem, ha a tinta rendelkezésre áll
- Az Epson Status Monitor karbantartási figyelmeztetést mutat
- Villogó fények és blokkolt munkák
- A készülék a visszaállításig zárolva van
Reset Epson ET-2870 Waste Ink Counter in 3 Steps
- 1. lépés: Connect Epson ET-2870 to a Windows computer with a stable Internet connection using a USB cable.
- 2. lépés: Indítsa el a oldalt. Wic Reset Connect in Administrator mode and wait until Epson ET-2870 appears in the device list.
- 3. lépés: Use the key to reset the counter, wait for completion, then restart Epson ET-2870 to finalize.
Most Epson ET-2870 waste counter resets finish in ~1–2 minutes.
Ha a nyomtatót nem észleli a rendszer
- Használjon közvetlen USB-kapcsolatot (kerülje a hubokat).
- Indítsa újra a nyomtatót és a számítógépet, majd próbálja meg újra.
- Futtassa az alkalmazást rendszergazdaként.
- Próbáljon ki egy másik USB-kábelt (egyes kábelek csak töltésre alkalmasak).
- Zárja be az Epson Status Monitor vagy más nyomtató segédprogramokat.
Guide prepared for Epson ET-2870 – Waste Ink Counter Reset using Wic Reset Connect.