Epson ET-2870 Waste Ink Counter Reset
When the Epson ET-2870 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2870 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson ET-2870 Waste Ink Counter
Met Wic Reset Connect, you can reset the Epson ET-2870 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Typische tekenen
- Printer weigert af te drukken, zelfs met beschikbare inkt
- Epson Status Monitor toont onderhoudswaarschuwing
- Knipperende lampjes en geblokkeerde banen
- Apparaat is vergrendeld totdat reset wordt uitgevoerd
Reset Epson ET-2870 Waste Ink Counter in 3 Steps
- Stap 1: Connect Epson ET-2870 to a Windows computer with a stable Internet connection using a USB cable.
- Stap 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2870 appears in the device list.
- Stap 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2870 to finalize.
Most Epson ET-2870 waste counter resets finish in ~1–2 minutes.
Als de printer niet wordt gedetecteerd
- Gebruik een directe USB-verbinding (vermijd hubs).
- Start de printer en pc opnieuw op en probeer het opnieuw.
- Voer de app uit als Administrator.
- Probeer een andere USB-kabel (sommige kabels zijn alleen oplaadbaar).
- Sluit Epson Status Monitor of andere hulpprogramma's voor printers.
Guide prepared for Epson ET-2870 – Waste Ink Counter Reset using Wic Reset Connect.