Epson ET-2713 Waste Ink Counter Reset
When the Epson ET-2713 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2713 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson ET-2713 Show ‘Service Required’?
S Wic Reset Connect, you can reset the Epson ET-2713 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson ET-2713 Ink Pad Counter Reset – Quick Steps
- Krok 1: Connect Epson ET-2713 to a Windows computer with a stable Internet connection using a USB cable.
- Krok 2: Štart Wic Reset Connect in Administrator mode and wait until Epson ET-2713 appears in the device list.
- Krok 3: Zadajte svoj resetovací kľúč a stlačte Obnovenie. Wait ~1–2 minutes, then restart Epson ET-2713.
Most Epson ET-2713 waste counter resets finish in ~1–2 minutes.
Systémové požiadavky
- Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
- Platný kľúč na resetovanie Wic Connect
- Windows 7/8/10/11 PC
- Stabilné internetové pripojenie počas resetovania
Ak tlačiareň nie je rozpoznaná
- Používajte priame pripojenie USB (vyhnite sa rozbočovačom).
- Spustite aplikáciu ako správca.
- Reštartujte tlačiareň a počítač a potom to skúste znova.
- Skúste iný kábel USB (niektoré káble sú určené len na nabíjanie).
- Dočasne vypnite VPN/proxy server, ak overenie zlyhá.
Guide prepared for Epson ET-2713 – Waste Ink Counter Reset using Wic Reset Connect.