Epson ET-2713 Waste Ink Counter Reset
When the Epson ET-2713 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2713 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson ET-2713 Show ‘Service Required’?
Con Wic Reset Connect, you can reset the Epson ET-2713 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson ET-2713 Ink Pad Counter Reset – Quick Steps
- Fase 1: Connect Epson ET-2713 to a Windows computer with a stable Internet connection using a USB cable.
- Fase 2: Inizio Wic Reset Connect in Administrator mode and wait until Epson ET-2713 appears in the device list.
- Fase 3: Inserire il tasto di reset e premere Reset. Wait ~1–2 minutes, then restart Epson ET-2713.
Most Epson ET-2713 waste counter resets finish in ~1–2 minutes.
Requisiti di sistema
- È necessaria la connessione USB (il reset Wi-Fi non è supportato)
- Wic Reset valido Chiave di reset Connect
- PC Windows 7/8/10/11
- Connessione Internet stabile durante il reset
Se la stampante non viene rilevata
- Utilizzare una connessione USB diretta (evitare gli hub).
- Eseguire l'applicazione come amministratore.
- Riavviare la stampante e il PC, quindi riprovare.
- Provare con un altro cavo USB (alcuni cavi sono a sola carica).
- Disattivare temporaneamente la VPN/proxy se la convalida fallisce.
Guide prepared for Epson ET-2713 – Waste Ink Counter Reset using Wic Reset Connect.