Epson ET-2713 Waste Ink Counter Reset
When the Epson ET-2713 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2713 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson ET-2713 Show ‘Service Required’?
A címen Wic Reset Connect, you can reset the Epson ET-2713 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Epson ET-2713 Ink Pad Counter Reset – Quick Steps
- 1. lépés: Connect Epson ET-2713 to a Windows computer with a stable Internet connection using a USB cable.
- 2. lépés: Indítsa el a oldalt. Wic Reset Connect in Administrator mode and wait until Epson ET-2713 appears in the device list.
- 3. lépés: Írja be a visszaállítási kulcsot, és nyomja meg a Reset. Wait ~1–2 minutes, then restart Epson ET-2713.
Most Epson ET-2713 waste counter resets finish in ~1–2 minutes.
Rendszerkövetelmények
- USB kapcsolat szükséges (Wi-Fi reset nem támogatott)
- Érvényes Wic Reset Connect visszaállítási kulcs
- Windows 7/8/10/11 PC
- Stabil internetkapcsolat az alaphelyzetbe állítás során
Ha a nyomtatót nem észleli a rendszer
- Használjon közvetlen USB-kapcsolatot (kerülje a hubokat).
- Futtassa az alkalmazást rendszergazdaként.
- Indítsa újra a nyomtatót és a számítógépet, majd próbálja meg újra.
- Próbáljon ki egy másik USB-kábelt (egyes kábelek csak töltésre alkalmasak).
- A VPN/proxy ideiglenes letiltása, ha az érvényesítés sikertelen.
Guide prepared for Epson ET-2713 – Waste Ink Counter Reset using Wic Reset Connect.