Epson L4158 Waste Ink Counter Reset

The Epson L4158 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4158 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L4158 Ink Pad Counter Warning?

Most Epson L4158 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

典型标志

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Three Steps to Restore Epson L4158 Printing

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson L4158 via USB (Wi-Fi reset is not supported).
2. 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson L4158 appears in the device list.
3. 步骤 3： 输入重置密钥并按 重置. Wait ~1–2 minutes, then restart Epson L4158.

Most Epson L4158 waste counter resets finish in ~1–2 minutes.

常见修复

• 如果验证失败，则暂时禁用 VPN/代理。.
• 重新启动打印机和电脑，然后再试一次。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 使用直接 USB 连接（避免使用集线器）。.