Epson L4158 Waste Ink Counter Reset

The Epson L4158 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4158 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L4158 Ink Pad Counter Warning?

Most Epson L4158 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Tipični znaki

• Tiskalnik noče tiskati, čeprav je črnilo na voljo
• Epson Status Monitor prikazuje opozorilo o vzdrževanju
• Utripajoče luči in blokirana delovna mesta
• Naprava je zaklenjena, dokler se ne izvede ponastavitev

Three Steps to Restore Epson L4158 Printing

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson L4158 via USB (Wi-Fi reset is not supported).
2. 2. korak: Začetek Wic Reset Connect in Administrator mode and wait until Epson L4158 appears in the device list.
3. 3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson L4158.

Most Epson L4158 waste counter resets finish in ~1–2 minutes.

Pogosti popravki

• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).