Epson L4158 Waste Ink Counter Reset

The Epson L4158 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4158 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L4158 Ink Pad Counter Warning?

Most Epson L4158 waste ink counter locks are solved by a software counter reset. Wic Reset Connect giver en ligetil procedure.

Typiske tegn

• Printeren nægter at udskrive, selv om der er blæk til rådighed
• Epson Status Monitor viser advarsel om vedligeholdelse
• Blinkende lys og blokerede jobs
• Enheden er låst, indtil nulstilling er udført

Three Steps to Restore Epson L4158 Printing

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4158 via USB (Wi-Fi reset is not supported).
2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson L4158 appears in the device list.
3. Trin 3: Indtast din nulstillingsnøgle, og tryk på Nulstil. Wait ~1–2 minutes, then restart Epson L4158.

Most Epson L4158 waste counter resets finish in ~1–2 minutes.

Almindelige rettelser

• Deaktiver midlertidigt VPN/proxy, hvis valideringen mislykkes.
• Genstart printeren og pc'en, og prøv igen.
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).
• Luk Epson Status Monitor eller andre printerværktøjer.
• Brug en direkte USB-forbindelse (undgå hubs).