Epson L4158 Waste Ink Counter Reset

The Epson L4158 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4158 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L4158 Ink Pad Counter Warning?

Most Epson L4158 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Tanda-tanda Khas

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Three Steps to Restore Epson L4158 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4158 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson L4158 appears in the device list.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson L4158.

Most Epson L4158 waste counter resets finish in ~1–2 minutes.

Perbaikan Umum

• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Gunakan koneksi USB langsung (hindari hub).