Epson L4158 Waste Ink Counter Reset

The Epson L4158 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4158 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L4158 Ink Pad Counter Warning?

Most Epson L4158 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Three Steps to Restore Epson L4158 Printing

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4158 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson L4158 appears in the device list.
3. Korak 3: Unesite svoj ključ za resetiranje i pritisnite Ponovno pokretanje. Wait ~1–2 minutes, then restart Epson L4158.

Most Epson L4158 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).