特定型号重置指南
Epson L4156 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson L4156 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson L4156
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L4156 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson L4156. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L4156
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for L4156 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L4156 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L4156.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L4156 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for L4156; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson L4156 reset FAQ
Does Epson L4156 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
Can I reset Epson L4156 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.