Epson EP-778A Waste Ink Counter Reset
When the Epson EP-778A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-778A uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson EP-778A Ink Pad Counter Warning?
Most Epson EP-778A waste ink counter locks are solved by a software counter reset. Wic Reset Connect poskytuje jednoduchý postup.
Typické znaky
- Tlačiareň odmieta tlačiť aj s dostupným atramentom
- Monitor stavu Epson zobrazuje upozornenie o údržbe
- Blikajúce kontrolky a zablokované úlohy
- Zariadenie je uzamknuté, kým sa nevykoná reset
Reset Epson EP-778A Waste Ink Counter in 3 Steps
- Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-778A via USB (Wi-Fi reset is not supported).
- Krok 2: Spustiť Wic Reset Connect as Administrator and confirm Epson EP-778A is detected.
- Krok 3: Vložte resetovací kľúč, kliknite na Obnovenie, and after completion power-cycle Epson EP-778A.
Most Epson EP-778A waste counter resets finish in ~1–2 minutes.
Predtým, ako začnete
- Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
- Windows 7/8/10/11 PC
- Stabilné internetové pripojenie počas resetovania
- Platný kľúč na resetovanie Wic Connect
Guide prepared for Epson EP-778A – Waste Ink Counter Reset using Wic Reset Connect.