Epson EP-778A Waste Ink Counter Reset

When the Epson EP-778A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-778A uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson EP-778A Ink Pad Counter Warning?

Most Epson EP-778A waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Reset Epson EP-778A Waste Ink Counter in 3 Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-778A via USB (Wi-Fi reset is not supported).
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson EP-778A is detected.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson EP-778A.

Most Epson EP-778A waste counter resets finish in ~1–2 minutes.

Prije nego što počnete

• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Windows 7/8/10/11 PC
• Stabilna internetska veza tijekom resetiranja
• Valjani Wic resetni ključ za povezivanje