Epson EP-778A Waste Ink Counter Reset
When the Epson EP-778A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-778A uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson EP-778A Ink Pad Counter Warning?
Most Epson EP-778A waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Tanda-tanda Khas
- Printer menolak untuk mencetak meskipun tinta tersedia
- Monitor Status Epson menunjukkan peringatan pemeliharaan
- Lampu berkedip dan pekerjaan terhalang
- Perangkat terkunci hingga pengaturan ulang dilakukan
Reset Epson EP-778A Waste Ink Counter in 3 Steps
- Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-778A via USB (Wi-Fi reset is not supported).
- Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson EP-778A is detected.
- Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson EP-778A.
Most Epson EP-778A waste counter resets finish in ~1–2 minutes.
Sebelum Anda Mulai
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Windows 7/8/10/11 PC
- Koneksi Internet stabil selama pengaturan ulang
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
Guide prepared for Epson EP-778A – Waste Ink Counter Reset using Wic Reset Connect.