Epson EP-778A Waste Ink Counter Reset
When the Epson EP-778A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-778A uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson EP-778A Ink Pad Counter Warning?
Most Epson EP-778A waste ink counter locks are solved by a software counter reset. Wic Reset Connect biedt een eenvoudige procedure.
Typische tekenen
- Printer weigert af te drukken, zelfs met beschikbare inkt
- Epson Status Monitor toont onderhoudswaarschuwing
- Knipperende lampjes en geblokkeerde banen
- Apparaat is vergrendeld totdat reset wordt uitgevoerd
Reset Epson EP-778A Waste Ink Counter in 3 Steps
- Stap 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-778A via USB (Wi-Fi reset is not supported).
- Stap 2: Ren Wic Reset Connect as Administrator and confirm Epson EP-778A is detected.
- Stap 3: Plak de resettoets, klik op Reset, and after completion power-cycle Epson EP-778A.
Most Epson EP-778A waste counter resets finish in ~1–2 minutes.
Voordat u begint
- USB-verbinding vereist (Wi-Fi-reset niet ondersteund)
- Windows 7/8/10/11 PC
- Stabiele internetverbinding tijdens het resetten
- Geldige Wic Reset Verbind Resetsleutel
Guide prepared for Epson EP-778A – Waste Ink Counter Reset using Wic Reset Connect.