Epson EP-778A Waste Ink Counter Reset
When the Epson EP-778A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-778A uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson EP-778A Ink Pad Counter Warning?
Most Epson EP-778A waste ink counter locks are solved by a software counter reset. Wic Reset Connect cung cấp một quy trình đơn giản.
Dấu hiệu điển hình
- Máy in từ chối in ngay cả khi còn mực.
- Epson Status Monitor hiển thị cảnh báo bảo trì.
- Đèn nhấp nháy và công việc bị chặn
- Thiết bị sẽ bị khóa cho đến khi thực hiện thao tác đặt lại.
Reset Epson EP-778A Waste Ink Counter in 3 Steps
- Bước 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-778A via USB (Wi-Fi reset is not supported).
- Bước 2: Chạy Wic Reset Connect as Administrator and confirm Epson EP-778A is detected.
- Bước 3: Dán khóa đặt lại, nhấp chuột Đặt lại, and after completion power-cycle Epson EP-778A.
Most Epson EP-778A waste counter resets finish in ~1–2 minutes.
Trước khi bắt đầu
- Cần kết nối USB (không hỗ trợ đặt lại Wi-Fi)
- Máy tính Windows 7/8/10/11
- Kết nối Internet ổn định trong quá trình reset
- Khóa đặt lại kết nối Wic hợp lệ
Guide prepared for Epson EP-778A – Waste Ink Counter Reset using Wic Reset Connect.