Epson ET-2851 Waste Ink Counter Reset

When the Epson ET-2851 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2851 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ET-2851 Show ‘Service Required’?

Cu Wic Reset Connect, you can reset the Epson ET-2851 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Simptome comune

• ‘Mesaj ’Service Required" / mesaj privind durata de viață în driver sau utilitar
• Codul de întreținere/suport (variază în funcție de model/pilot)
• Imprimarea se oprește după ciclurile de curățare
• Avertizarea se repetă după repornirea imprimantei

Three Steps to Restore Epson ET-2851 Printing

1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2851 via USB (Wi-Fi reset is not supported).
2. Pasul 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2851 appears in the device list.
3. Pasul 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2851 to finalize.

Most Epson ET-2851 waste counter resets finish in ~1–2 minutes.

Ce vă trebuie

• Conexiune stabilă la internet în timpul resetării
• Conexiune USB necesară (resetarea Wi-Fi nu este acceptată)
• Valid Wic Reset Conectați cheia de resetare
• Windows 7/8/10/11 PC

Întrebări frecvente