Model-specific reset guide
Epson ET-2851 Setel Ulang Penghitung Tinta Limbah
The service-required message on Epson ET-2851 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
What the Epson ET-2851 service message means
An ink pad message is a maintenance safeguard. It indicates that Epson ET-2851 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2851. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2851
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for ET-2851 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2851 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2851.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2851 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for ET-2851; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson ET-2851 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson ET-2851 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson ET-2851 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson ET-2851
A direct USB connection, the correct driver and a valid key are all you need to reset Epson ET-2851.