Epson SX110 Waste Ink Counter Reset

The Epson SX110 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX110 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX110 Show ‘Service Required’?

Com Wic Reset Connect, you can reset the Epson SX110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Sintomas comuns

• A impressora recusa-se a imprimir mesmo com tinta disponível
• O Epson Status Monitor mostra um aviso de manutenção
• Luzes intermitentes e trabalhos bloqueados
• O dispositivo fica bloqueado até ser efectuada a reposição

Epson SX110 Ink Pad Counter Reset – Quick Steps

1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX110 via USB (Wi-Fi reset is not supported).
2. Passo 2: Início Wic Reset Connect in Administrator mode and wait until Epson SX110 appears in the device list.
3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson SX110 to finalize.

Most Epson SX110 waste counter resets finish in ~1–2 minutes.

Resolução de problemas

• Experimente outro cabo USB (alguns cabos são apenas de carregamento).
• Feche o Epson Status Monitor ou outros utilitários da impressora.
• Reinicie a impressora e o PC e tente novamente.
• Utilize uma ligação USB direta (evite hubs).
• Desativar temporariamente a VPN/proxy se a validação falhar.