Epson SX110 Waste Ink Counter Reset
The Epson SX110 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX110 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson SX110 Show ‘Service Required’?
A címen Wic Reset Connect, you can reset the Epson SX110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Gyakori tünetek
- A nyomtató nem hajlandó nyomtatni, még akkor sem, ha a tinta rendelkezésre áll
- Az Epson Status Monitor karbantartási figyelmeztetést mutat
- Villogó fények és blokkolt munkák
- A készülék a visszaállításig zárolva van
Epson SX110 Ink Pad Counter Reset – Quick Steps
- 1. lépés: Use a Windows PC (7–11) with Internet access. Connect Epson SX110 via USB (Wi-Fi reset is not supported).
- 2. lépés: Indítsa el a oldalt. Wic Reset Connect in Administrator mode and wait until Epson SX110 appears in the device list.
- 3. lépés: Use the key to reset the counter, wait for completion, then restart Epson SX110 to finalize.
Most Epson SX110 waste counter resets finish in ~1–2 minutes.
Hibaelhárítás
- Próbáljon ki egy másik USB-kábelt (egyes kábelek csak töltésre alkalmasak).
- Zárja be az Epson Status Monitor vagy más nyomtató segédprogramokat.
- Indítsa újra a nyomtatót és a számítógépet, majd próbálja meg újra.
- Használjon közvetlen USB-kapcsolatot (kerülje a hubokat).
- A VPN/proxy ideiglenes letiltása, ha az érvényesítés sikertelen.
Guide prepared for Epson SX110 – Waste Ink Counter Reset using Wic Reset Connect.