Epson SX110 Waste Ink Counter Reset

The Epson SX110 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX110 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX110 Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson SX110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Epson SX110 Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX110 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson SX110 appears in the device list.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson SX110 to finalize.

Most Epson SX110 waste counter resets finish in ~1–2 minutes.

Pemecahan masalah

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.