Epson SX110 Waste Ink Counter Reset

The Epson SX110 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX110 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX110 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson SX110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Epson SX110 Ink Pad Counter Reset – Quick Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX110 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson SX110 appears in the device list.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson SX110 to finalize.

Most Epson SX110 waste counter resets finish in ~1–2 minutes.

Otklanjanje poteškoća

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.