Epson TX113 Waste Ink Counter Reset
When the Epson TX113 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX113 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson TX113 Ink Pad Counter Warning?
Una visita di assistenza spesso non è necessaria. Wic Reset Connect allows a safe Epson TX113 waste counter reset in minutes.
Three Steps to Restore Epson TX113 Printing
- Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX113 via USB (Wi-Fi reset is not supported).
- Fase 2: Correre Wic Reset Connect as Administrator and confirm Epson TX113 is detected.
- Fase 3: Inserire il tasto di reset e premere Reset. Wait ~1–2 minutes, then restart Epson TX113.
Most Epson TX113 waste counter resets finish in ~1–2 minutes.
Correzioni comuni
- Riavviare la stampante e il PC, quindi riprovare.
- Provare con un altro cavo USB (alcuni cavi sono a sola carica).
- Chiudere Epson Status Monitor o altre utility della stampante.
- Eseguire l'applicazione come amministratore.
- Disattivare temporaneamente la VPN/proxy se la convalida fallisce.
Domande frequenti
E se il reset non funziona?
Controllare il cavo/la porta USB, eseguire come amministratore e chiudere le altre utility della stampante.
È possibile eseguire il reset tramite Wi-Fi?
No. Il reset richiede una connessione USB a un PC Windows.
Quanto tempo ci vuole?
Di solito circa 1-2 minuti.
Ho bisogno di un centro di assistenza?
In genere non per il blocco del contatore dell'inchiostro di scarto; di solito è sufficiente un reset.
Guide prepared for Epson TX113 – Waste Ink Counter Reset using Wic Reset Connect.