Model-specific reset guide
Epson TX113 Reset Waste Ink Counter
The service-required message on Epson TX113 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Before resetting Epson TX113
Epson TX113 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson TX113. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX113
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for TX113 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX113 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX113.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX113 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for TX113; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson TX113 reset FAQ
Can I reset Epson TX113 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson TX113 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson TX113
Prepare Epson TX113, purchase a reset key and return to printing without an unnecessary service visit.