Epson TX113 Waste Ink Counter Reset
When the Epson TX113 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX113 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson TX113 Ink Pad Counter Warning?
غالباً ما تكون زيارة الخدمة غير ضرورية. Wic Reset Connect allows a safe Epson TX113 waste counter reset in minutes.
Three Steps to Restore Epson TX113 Printing
- الخطوة 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX113 via USB (Wi-Fi reset is not supported).
- الخطوة 2: تشغيل Wic Reset Connect as Administrator and confirm Epson TX113 is detected.
- الخطوة 3: أدخل مفتاح إعادة الضبط واضغط على إعادة تعيين. Wait ~1–2 minutes, then restart Epson TX113.
Most Epson TX113 waste counter resets finish in ~1–2 minutes.
الإصلاحات الشائعة
- أعد تشغيل الطابعة والكمبيوتر، ثم حاول مرة أخرى.
- جرّب كابل USB آخر (بعض الكابلات للشحن فقط).
- أغلق Epson Status Monitor أو الأدوات المساعدة الأخرى للطابعة.
- قم بتشغيل التطبيق كمسؤول.
- تعطيل VPN/الوكيل مؤقتاً إذا فشلت عملية التحقق من الصحة.
الأسئلة الشائعة
ماذا لو لم تنجح إعادة التعيين؟
تحقق من كابل/منفذ USB، وقم بتشغيله كمسؤول، وأغلق أدوات الطابعة الأخرى.
هل يمكنني إعادة التعيين عبر شبكة Wi-Fi؟
لا، تتطلب إعادة الضبط اتصال USB بجهاز كمبيوتر يعمل بنظام Windows.
كم من الوقت يستغرق؟
عادةً حوالي 1-2 دقيقة تقريباً.
هل أحتاج إلى مركز خدمة؟
عادةً لا يكون ذلك في حالة قفل عداد الحبر المهدر؛ وعادةً ما تكون إعادة الضبط كافية.
Guide prepared for Epson TX113 – Waste Ink Counter Reset using Wic Reset Connect.