Epson TX117 Waste Ink Counter Reset

When the Epson TX117 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson TX117 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson TX117 Stops Printing (Waste Counter Limit)

Con Wic Reset Connect, you can reset the Epson TX117 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson TX117 Waste Counter Reset

1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX117 via USB (Wi-Fi reset is not supported).
2. Fase 2: Inizio Wic Reset Connect in Administrator mode and wait until Epson TX117 appears in the device list.
3. Fase 3: Use the key to reset the counter, wait for completion, then restart Epson TX117 to finalize.

Most Epson TX117 waste counter resets finish in ~1–2 minutes.

Requisiti di sistema

• PC Windows 7/8/10/11
• È necessaria la connessione USB (il reset Wi-Fi non è supportato)
• Wic Reset valido Chiave di reset Connect
• Connessione Internet stabile durante il reset

Risoluzione dei problemi

• Eseguire l'applicazione come amministratore.
• Utilizzare una connessione USB diretta (evitare gli hub).
• Riavviare la stampante e il PC, quindi riprovare.
• Provare con un altro cavo USB (alcuni cavi sono a sola carica).
• Disattivare temporaneamente la VPN/proxy se la convalida fallisce.

FAQ