Epson L4156 Waste Ink Counter Reset

If your Epson L4156 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4156 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L4156 Waste Ink Counter

Most Epson L4156 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Bagaimana Kesalahan Muncul

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Step-by-Step: Epson L4156 Waste Counter Reset

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4156 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson L4156.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson L4156.

Most Epson L4156 waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.

PERTANYAAN YANG SERING DIAJUKAN