دليل إعادة الضبط الخاص بالطراز

Epson B30 Reset Waste Ink Counter

If your Epson B30 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson B30 warning

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson B30 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson B30. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson B30

أكمل هذه الخطوات بالترتيب. يُعد اتصال USB مباشر وبرنامج التشغيل الأصلي Epson أمرين أساسيين لضمان اتصال موثوق.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for B30 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson B30 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson B30.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: A successful reset is finalized by switching Epson B30 off and on. The printer should then accept jobs normally.
If Epson B30 is not detected
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • Install the original Epson driver for B30; a generic Windows driver may not expose the required communication interface.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson B30 reset FAQ

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

Does Epson B30 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

أعد الضبط بثقة

Restore Epson B30

Complete the Epson B30 counter reset with Wic Reset Connect and assistance whenever you need it.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك