特定型号重置指南
Epson B30 Reset Waste Ink Counter
If your Epson B30 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
The counter behind the Epson B30 warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson B30 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson B30. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson B30
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for B30 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson B30 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson B30.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson B30 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for B30; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson B30 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson B30 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.