Epson B30 Waste Ink Counter Reset

If your Epson B30 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson B30 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson B30 Stops Printing (Waste Counter Limit)

Most Epson B30 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Three Steps to Restore Epson B30 Printing

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson B30 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson B30 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson B30.

Most Epson B30 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Pokrenite aplikaciju kao administrator.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.