Epson B30 Waste Ink Counter Reset

If your Epson B30 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson B30 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson B30 Stops Printing (Waste Counter Limit)

Most Epson B30 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Three Steps to Restore Epson B30 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson B30 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson B30 appears in the device list.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson B30.

Most Epson B30 waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.