Epson ME-300 Waste Ink Counter Reset

When the Epson ME-300 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-300 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ME-300 Waste Ink Counter

Med Wic Reset Connect, you can reset the Epson ME-300 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson ME-300 Waste Counter Reset

1. Steg 1: Use a Windows PC (7–11) with Internet access. Connect Epson ME-300 via USB (Wi-Fi reset is not supported).
2. Steg 2: Öppna Wic Reset Connect with admin privileges and verify device recognition for Epson ME-300.
3. Steg 3: Ange din återställningsnyckel och tryck på Återställning. Wait ~1–2 minutes, then restart Epson ME-300.

Most Epson ME-300 waste counter resets finish in ~1–2 minutes.

Om skrivaren inte identifieras

• Prova en annan USB-kabel (vissa kablar är endast laddningsbara).
• Starta om skrivaren och datorn och försök sedan igen.
• Kör appen som administratör.
• Använd en direkt USB-anslutning (undvik hubbar).
• Inaktivera VPN/proxy tillfälligt om valideringen misslyckas.