Epson ME-300 Waste Ink Counter Reset

When the Epson ME-300 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-300 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ME-300 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson ME-300 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson ME-300 Waste Counter Reset

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson ME-300 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson ME-300.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson ME-300.

Most Epson ME-300 waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Jalankan aplikasi sebagai Administrator.
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.