Epson M200 Waste Ink Counter Reset
The Epson M200 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
The Epson M200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson M200 Show ‘Service Required’?
Most Epson M200 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornisce una procedura semplice.
Come appare l'errore
- ‘Messaggio ’Service Required' / service life nel driver o nell'utility
- Codice di manutenzione/assistenza (varia a seconda del modello/driver)
- La stampa si interrompe dopo i cicli di pulizia
- L'avviso si ripete dopo il riavvio della stampante
Step-by-Step: Epson M200 Waste Counter Reset
- Fase 1: Connect Epson M200 to a Windows computer with a stable Internet connection using a USB cable.
- Fase 2: Aperto Wic Reset Connect with admin privileges and verify device recognition for Epson M200.
- Fase 3: Use the key to reset the counter, wait for completion, then restart Epson M200 to finalize.
Most Epson M200 waste counter resets finish in ~1–2 minutes.
Requisiti di sistema
- Wic Reset valido Chiave di reset Connect
- Connessione Internet stabile durante il reset
- È necessaria la connessione USB (il reset Wi-Fi non è supportato)
- PC Windows 7/8/10/11
Se la stampante non viene rilevata
- Disattivare temporaneamente la VPN/proxy se la convalida fallisce.
- Chiudere Epson Status Monitor o altre utility della stampante.
- Utilizzare una connessione USB diretta (evitare gli hub).
- Eseguire l'applicazione come amministratore.
- Riavviare la stampante e il PC, quindi riprovare.
Guide prepared for Epson M200 – Waste Ink Counter Reset using Wic Reset Connect.