Epson M200 Waste Ink Counter Reset
The Epson M200 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
The Epson M200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson M200 Show ‘Service Required’?
Most Epson M200 waste ink counter locks are solved by a software counter reset. Wic Reset Connect إجراءً مباشرًا.
كيف يظهر الخطأ
- ‘الخدمة مطلوبة’/ رسالة "مدة الخدمة مطلوبة" في برنامج التشغيل أو الأداة المساعدة
- رمز الصيانة/الدعم (يختلف باختلاف الطراز/سائق)
- تتوقف الطباعة بعد دورات التنظيف
- يتكرر التحذير بعد إعادة تشغيل الطابعة
Step-by-Step: Epson M200 Waste Counter Reset
- الخطوة 1: Connect Epson M200 to a Windows computer with a stable Internet connection using a USB cable.
- الخطوة 2: مفتوح Wic Reset Connect with admin privileges and verify device recognition for Epson M200.
- الخطوة 3: Use the key to reset the counter, wait for completion, then restart Epson M200 to finalize.
Most Epson M200 waste counter resets finish in ~1–2 minutes.
متطلبات النظام
- مفتاح إعادة تعيين مفتاح إعادة تعيين اتصال Wic صالح
- اتصال إنترنت مستقر أثناء إعادة التعيين
- يلزم الاتصال ب USB (إعادة تعيين Wi-Fi غير مدعوم)
- نظام التشغيل ويندوز 7/8/10/11 الكمبيوتر الشخصي
إذا لم يتم اكتشاف الطابعة
- تعطيل VPN/الوكيل مؤقتاً إذا فشلت عملية التحقق من الصحة.
- أغلق Epson Status Monitor أو الأدوات المساعدة الأخرى للطابعة.
- استخدم اتصال USB مباشر (تجنب المحاور).
- قم بتشغيل التطبيق كمسؤول.
- أعد تشغيل الطابعة والكمبيوتر، ثم حاول مرة أخرى.
Guide prepared for Epson M200 – Waste Ink Counter Reset using Wic Reset Connect.