Epson M200 Waste Ink Counter Reset
The Epson M200 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
The Epson M200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson M200 Show ‘Service Required’?
Most Epson M200 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.
错误如何出现
- ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
- 维护/支持代码（因型号/驱动程序而异）
- 清洁循环后停止打印
- 重新启动打印机后，警告重复出现
Step-by-Step: Epson M200 Waste Counter Reset
- 步骤 1： Connect Epson M200 to a Windows computer with a stable Internet connection using a USB cable.
- 步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson M200.
- 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson M200 to finalize.
Most Epson M200 waste counter resets finish in ~1–2 minutes.
系统要求
- 有效 Wic 复位连接复位键
- 重置期间稳定的互联网连接
- 需要 USB 连接（不支持 Wi-Fi 重置）
- Windows 7/8/10/11 电脑
如果检测不到打印机
- 如果验证失败，则暂时禁用 VPN/代理。.
- 关闭 Epson 状态监视器或其他打印机实用程序。.
- 使用直接 USB 连接（避免使用集线器）。.
- 以管理员身份运行应用程序。.
- 重新启动打印机和电脑，然后再试一次。.
Guide prepared for Epson M200 – Waste Ink Counter Reset using Wic Reset Connect.