Epson M200 Waste Ink Counter Reset
The Epson M200 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
The Epson M200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson M200 Show ‘Service Required’?
Most Epson M200 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Bagaimana Kesalahan Muncul
- ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
- Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
- Pencetakan berhenti setelah siklus pembersihan
- Peringatan berulang setelah printer dihidupkan ulang
Step-by-Step: Epson M200 Waste Counter Reset
- Langkah 1: Connect Epson M200 to a Windows computer with a stable Internet connection using a USB cable.
- Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson M200.
- Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson M200 to finalize.
Most Epson M200 waste counter resets finish in ~1–2 minutes.
Persyaratan Sistem
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Koneksi Internet stabil selama pengaturan ulang
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Windows 7/8/10/11 PC
Jika Printer Tidak Terdeteksi
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Gunakan koneksi USB langsung (hindari hub).
- Jalankan aplikasi sebagai Administrator.
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson M200 – Waste Ink Counter Reset using Wic Reset Connect.