Epson ET-2702 Waste Ink Counter Reset
When the Epson ET-2702 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
The Epson ET-2702 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
What Causes the Epson ET-2702 Ink Pad Counter Warning?
Most Epson ET-2702 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornisce una procedura semplice.
Three Steps to Restore Epson ET-2702 Printing
- Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2702 via USB (Wi-Fi reset is not supported).
- Fase 2: Inizio Wic Reset Connect in Administrator mode and wait until Epson ET-2702 appears in the device list.
- Fase 3: Incollare la chiave di ripristino, fare clic su Reset, and after completion power-cycle Epson ET-2702.
Most Epson ET-2702 waste counter resets finish in ~1–2 minutes.
Cosa serve
- È necessaria la connessione USB (il reset Wi-Fi non è supportato)
- Wic Reset valido Chiave di reset Connect
- PC Windows 7/8/10/11
- Connessione Internet stabile durante il reset
Domande frequenti
È possibile eseguire il reset tramite Wi-Fi?
No. Il reset richiede una connessione USB a un PC Windows.
E se il reset non funziona?
Controllare il cavo/la porta USB, eseguire come amministratore e chiudere le altre utility della stampante.
Ho bisogno di un centro di assistenza?
In genere non per il blocco del contatore dell'inchiostro di scarto; di solito è sufficiente un reset.
Quanto tempo ci vuole?
Di solito circa 1-2 minuti.
Guide prepared for Epson ET-2702 – Waste Ink Counter Reset using Wic Reset Connect.