Epson ET-2702 Waste Ink Counter Reset
When the Epson ET-2702 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
The Epson ET-2702 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
What Causes the Epson ET-2702 Ink Pad Counter Warning?
Most Epson ET-2702 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Three Steps to Restore Epson ET-2702 Printing
- Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2702 via USB (Wi-Fi reset is not supported).
- Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson ET-2702 appears in the device list.
- Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson ET-2702.
Most Epson ET-2702 waste counter resets finish in ~1–2 minutes.
Apa yang Anda Butuhkan
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Windows 7/8/10/11 PC
- Koneksi Internet stabil selama pengaturan ulang
Pertanyaan yang Sering Diajukan
Dapatkah saya mengatur ulang melalui Wi-Fi?
Tidak. Pengaturan ulang memerlukan koneksi USB ke PC Windows.
Bagaimana jika pengaturan ulang tidak berhasil?
Periksa kabel/port USB, jalankan sebagai admin, dan tutup utilitas printer lainnya.
Apakah saya memerlukan pusat layanan?
Biasanya tidak untuk kunci penghitung tinta yang terbuang; pengaturan ulang biasanya sudah cukup.
Berapa lama waktu yang dibutuhkan?
Biasanya sekitar 1-2 menit.
Guide prepared for Epson ET-2702 – Waste Ink Counter Reset using Wic Reset Connect.